XT-600 / 1000(CNC) Gundrilling Machine
Product Introduction
XT-600/1000 CNC /Drilling capacity and Max. depth of drilling: Ø 3~25mm × 600~1000mm
Application
Optional Accessories
- The following brands of controllers can be chosen for bed type deep hole drilling machines: Fanuc, Mitsubishi or Syntec CNC controls.
- The worktable and machine base of the gun drilling machine are designed to come with bed type installation. Its worktable can bear three times the weight that can be born by worktable of knee type of machine, ensuring its positioning accuracy during its movement or its drilling process when the machine is in full operation or mass production. It is suitable for chilling small plastic molds, glass extrusion molds, heat exchangers, water cooling holes, workpieces with off-center holes and PCD deep hole drilling.
- Automatic lubrication pump is provided as standard accessory to ensure all the bearing surfaces and screws are well lubricated.
- To ensure accuracy in drilling, X, Y and Z axes are equipped with precision ball screws.
Specification | Model No. | XT-600 | XT-1000 |
---|---|---|---|
Drill Capacity | Hole dia | Ø3~Ø25mm | |
Max. depth (Z) | 600mm | 1000mm | |
Power | Spindle motor | 7.5KW | |
Worktable horizontal (X) | 2.9KW | ||
Worktable Vertical (Y) | 2.9KW | ||
Drill spindle feed (Z) | 2.9KW | ||
Coolant pump motor | 7.5HP+5HP | ||
Speed | Max. spindle speed | 6000 rpm | |
Drill Speed | 10~150 mm / min | ||
Rapid | 5000 mm / min | ||
Ball screw for feeds | Spindle infeed(z) | Ø40xP10xC3 | |
Worktable | Max. loading capacity | 2,000kgs | |
Table size | 600x900 mm | ||
Stroke of worktable horizontal | 600mm | ||
Stroke of Vertical axis(Y) | 600mm | ||
Coolant pump | Pump output | Max.40 Liters/Min | |
Max. pressure | Max.110kgs/㎝ | ||
Coolant tank | 800 Liter | ||
Controller | Type | Fanuc /Mitsubishi/Syntec | |
Controlled axes | X,Y,Z & Spindle | ||
Min. setting unit | 0.001mm | ||
Interface | RS232 | ||
Floor space | 3900X4200mm | ||
Net weight | 5000 kgs | 6000kgs |