XT-1500/1800(CNC) Gundrilling Machine
The XT-1500/1800 (CNC) gun drilling equipment features a column-type design with CNC control, allowing the option to choose brands like FANUC or MITSUBISHI according to specific requirements. Microdrilling's gun drilling equipment is specifically designed for drilling water lines and ejector pin holes in large injection molds. The machine's spindle is supported by angular contact bearings and achieves full lubrication throughout the running components of the main unit. The robust honeycomb-shaped column structure ensures a stable cutting environment.
Type: Bed Type Deep Hole Drilling Machine
- The Column type Deep hole drilling machine with CNC control are designed for drilling waterlines, Ejector pin holes of large type injection molds.
- Spindle is supported by angular contact bearings well-lubricated to all running points in the head.
- The rigid honeycomb walled column gives a stable cutting condition. FC-32 castings have been stress relived and annealed.
- Hardened and ground double V-ways for worktable X-axis main slide to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.
- A huge wide and long worktable allows heavy work pieces. And extra wide saddle gives much heavier loading capacity.
- Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
- Spindle feed Z-axis and A-axis, feature P-grade linear motion guide way and provides stable cutting capacity.
- CNC could be selected with Fanuc or Mitsubishi brands.
- CE mark are available for special required.
|Specification||Model No.||XT-1500 CNC||XT-1800 CNC|
|Drill Capacity||Hole dia||Ø3~Ø25mm|
|Max. depth (Z)||1500mm||1500mm|
|Worktable horizontal (X)||3.3KW|
|Drill spindle Vertical (Y)||3.3KW|
|Drill spindle feed (Z)||2.1KW|
|High pressure motor||7.5KW|
|Speed||Max. spindle speed||rpm|
|Drill Speed||mm / min|
|Rapid||500 mm / min|
|Worktable||Max. loading capacity||7,000KGS|
|Table size||1800*1200 mm||2200*1200mm|
|Stroke of worktable vertical(X)||1500 mm|
|Stroke of worktable vertical(Y)||900 mm||1000mm|
|High pressure pump||Pump output||54 ~ 90 Liter / min|
|Max. pressure||105 kgs / cm|
|Coolant tank||1200 Liter|
|Controlled axes||X,Y,Z -3 axes|
|Min. setting unit||0.001 mm|
|Floor space||6000*4700 mm||6000*5000 mm|
|Net weight||20,000 kgs||21,000 kgs|